Wolf Repair Pro Los Angeles, CA Cooking equipment service
Menu
Call (310) 742-8625 Book a visit

Visits 8am to 8pm, every day · line answered 24/7

8am to 8pm, every day (310) 742-8625

Wolf cooktops · Los Angeles, CA

Wolf Cooktop and Rangetop Repair in Los Angeles

One zone has gone dead, or the glass has cracked, or the griddle only browns at one end, and somebody has already used the word replace. This shop tests the board before it condemns the glass, and tells you which of those two you are actually looking at.

  • Cooktops and rangetops first — gas and induction, boards, coils, burners, griddles and charbroilers
  • Encino, Cheviot Hills, Mar Vista and Larchmont Village — the whole service area, and nothing beyond it
  • A meter before a quote: the board is tested before the glass is condemned

$89 flat, for the visit and the diagnosis, credited against the repair

Stainless gas range with the oven door lowered, one burner cap lifted off the burner head, and a wrench on a folded towel resting on the door

The technician

Noor Haddad

Trade
Cooking-appliance technician — induction and electric

Wolf Repair Pro Los Angeles has her on cooktops and rangetops; 8 years in the trade.

Test the board before condemning the glass. That is the order of work on this site, and it is the whole reason a cooktop that a dealer has written off often turns out to need one part.

That sentence is the whole method, and it is why this site is built around cooktops and rangetops rather than around everything with a plug. A zone that has gone dead, a panel that has gone quiet and a pane that has cracked all look the same from standing height. What separates them is a meter, and the order they get put on it.

How this shop works, and what it does not take on

Before anything is condemned

What goes on the meter first

Three different parts produce one identical complaint: the zone is dead. They cost nothing alike and only one of them is worth replacing on a guess, which is none of them. This is the order they get tested in, and the order this site is written in.

  1. 01

    Induction power board

    An induction power board is the inverter under the glass that turns household current into the high-frequency field a pan sits in.

    It is not the coil it drives, and it is not the touch panel that tells it what to do.

    On the meterSupply at the board, then drive to the coil.

  2. 02

    Spark module

    A spark module is the small box that fires every electrode on a gas cooktop at once, for as long as it is asked to.

    It is not the electrode it fires, and it is not the valve that lets the gas through.

    On the meterWhether the ticking stops when the switch it listens to is released.

  3. 03

    Touch control panel

    A touch control panel is the sensor layer bonded under the glass that reads a fingertip and passes the setting on.

    It is not the power board, though a panel that has stopped reading looks exactly like a zone that has stopped heating.

    On the meterWhether the panel still answers when the zone is told to run.

All three sit under the same sheet of glass, and from standing height they are one fault. Wolf Repair Pro Los Angeles tests them in that order before quoting anything — (310) 742-8625.

The question underneath most of these calls

Repair or replace, decided on evidence

A dealer looks at a cooktop with one dead zone and says the word replace, because replacing is the thing a dealer sells. The honest answer depends on which part died, whether it is still made, and what a like-for-like unit would cost you today. Five cases, each with the measurement that settles it.

  1. Induction Zone Dead: Power Board, Coil or a New Cooktop? Induction power board
  2. Cracked Glass on a Wolf Induction or Electric Cooktop Cooktop glass
  3. An Older Wolf Gas Cooktop: Igniters, Valves, or Time to Move On Burner valve
  4. Wolf Rangetop Griddle or Charbroiler That Heats Unevenly Griddle plate
  5. Replacing a Working Gas Cooktop with Induction in Los Angeles Induction cooktop

None of it is decided over the phone, and none of it costs more than the flat $89 until you have heard a number and said yes to it.

Gas burner base exposed with the cap and the burner ring both lifted off and set down next to it, a towel and an open-end wrench resting on the open oven door

Model families

Which Wolf is in your kitchen

The letters at the front of the model number say which family the equipment belongs to, and that decides which parts travel with us. Wolf puts the rating plate on the underside of a cooktop, which is no use once it is in the counter — so on a cooktop, and on a range or a built-in oven too, the paperwork in a kitchen drawer is usually the quicker way to the number than hunting for the plate itself.

Wolf model prefixes and the faults we are called out for on each
Prefix Family Called out for Repair page
SRT Sealed-burner rangetops — cooking surface only, cabinetry underneath One bank that will not light, a griddle plate cold at one end, a charbroiler scorching in patches Cooktop Repair
CI Induction cooktops A zone that drops out under load, a level that blinks instead of holding, a panel gone deaf on one side Cooktop Repair
CG Gas cooktops with dual-stacked sealed burners Ticking that never catches, a simmer that roars, orange flame sootying the pan bases Cooktop Repair
CE Electric cooktops — radiant elements under a glass-ceramic top A zone that never comes up to heat, an outer ring that will not join the inner one, a bridge that refuses to pair Cooktop Repair
DF Dual-fuel ranges — gas burners over an electric oven A cold oven under a working cooktop, bake temperature that has walked, lockouts after a power dip Range Repair
GR All-gas ranges, sealed burners over a gas oven Ignition on one side only, a cavity that will not hold, a simmer that blows itself out Range Repair
SO / DO Built-in single and double wall ovens A fan that stops mid-bake, a door letting heat into the cabinet, one cavity out and one fine Oven Repair
CSO Convection steam ovens A water fault with the tank full, scale through the steam circuit, a pump labouring at a blocked intake Oven Repair
PW / VW / DD Pro wall and canopy hoods, inserts, and downdraft ventilation Air moving with the smoke still in the room, one speed only, buzzing lighting, a damper that never opens Range Hood Repair

Reading the panel

What the cooktop is signalling

An induction cooktop that has stopped doing what it was asked is usually still talking: a level that will not settle, a zone that drops out warm, a panel that will not take a fingertip. Each one narrows the fault down before anybody opens anything.

  • A power level that blinks instead of settling

    Flashing Power Level: Pan Not Detected

    Pan detection is the check an induction cooktop runs before it commits power, confirming that something magnetic is actually sitting over the ring it has been asked to heat.

  • A zone that quits partway through, with the surface still hot

    Zone Shuts Off Hot: Over-Temperature Protection

    Over-temperature protection is the cut-out an induction cooktop runs on itself, dropping a zone out of service before the parts under the glass reach a heat that would damage them.

  • A panel that lights up but will not take a setting

    Locked Controls: What the Lock Indicator Means

    Control lock is the setting that makes a cooktop refuse the panel on purpose, so a wipe of the worktop or a leaning sleeve cannot start a zone.

Every indication this site has a page for, defined

Reviews

What Los Angeles kitchens say

Calls taken across Encino, Cheviot Hills, Mar Vista and Larchmont Village.

4.9/ 51,467 reviews

  • Induction zone kept cutting out under a full pot, always in the afternoon heat. The cooling fan was choked with grease and dust. Runs fine now, though he was slow to answer my follow-up.

    Kavya B. · Encino · July 2026

  • Igniters on the two ocean-side burners had corroded right through, which he says is normal this close to the water. He replaced both, cleared the ports, and showed me the green crust on the parts he took out. No upsell.

    Kanoa L. · Mar Vista · June 2026

  • Half the lights were dead and the rest flickered. Corroded sockets, not the transformer somebody else had blamed. He fitted new holders. Only gripe is he turned up at the end of the window.

    Chandra V. · Mar Vista · January 2026

What we repair

Four things, done properly

Wolf is cooking equipment, so that is the whole list: what heats, what lights and what pulls the air out. No refrigeration — that is a different brand and a different trade.

  1. Stainless gas range seen straight on between two runs of white cabinets, oven door open flat and one burner cap removed on the cooktop

    01

    Range Repair

    Dual-fuel and all-gas Wolf ranges — the spark circuit, burner output, cavity heat and the control faults that surface after a Valley power dip.

    Calls that start like this

    • A burner ticks and ticks on a cold morning and never catches
    • The cooktop lights as usual while the oven under it stays stone cold
    • Nothing holds a simmer: the flame either roars or drops out
    • A griddle plate browns hard at one end and barely colours at the other

    Range Repair in Los Angeles

  2. Open oven cavity with the round perforated convection fan cover on the rear wall and the rack removed, cooktop grates above

    02

    Oven Repair

    Wolf wall ovens, double ovens and convection steam ovens — bake temperature that has drifted, a fan that quits, a door that stops sealing, a panel that locks out.

    Calls that start like this

    • Set for 400 and an hour later the roast is barely warm through
    • The convection fan whines and then stops partway into a bake
    • The door stands a finger open and heat pours into the cabinet run
    • A code appears on the panel and the cavity will not start at all

    Oven Repair in Los Angeles

  3. Cooktop deck at close range with one burner assembly opened up to the spark electrode and brass orifice, knurled control knobs in a row

    03

    Cooktop Repair

    Wolf cooktops and rangetops in gas and induction — power boards, coils, touch glass, spark modules, dual-stacked sealed burners, griddle plates and charbroilers.

    Calls that start like this

    • One induction zone drops out a few minutes into a rolling boil
    • The power level blinks instead of holding, with the pan square on the ring
    • Sparking keeps ticking long after every burner has already lit
    • One bank burns tall and orange and sooties the bases of the pans

    Cooktop Repair in Los Angeles

  4. Stainless gas range with cast-iron grates, the front-left burner stripped to its base and brass orifice with the cap set down beside it, oven door open below

    04

    Range Hood Repair

    Wolf hoods, inserts and downdrafts — the blower, the speed control, the baffles and lighting, and the duct run that decides whether any of it clears the room.

    Calls that start like this

    • The blower pulls hard and smoke still drifts out across the island
    • Lights buzz, or half the row refuses to come on
    • The motor carries on turning after the switch has gone off
    • A metallic rattle and heavy shake once it reaches the top setting

    Range Hood Repair in Los Angeles

Questions we get on the phone

Answered straight

Is a dead induction zone the glass, the coil or the board?

Usually the board, sometimes the coil, rarely the glass — and from above all three are one dead ring. The power board is metered first, then the coil it drives, then the panel that commands them. Wolf Repair Pro Los Angeles quotes only after that order is finished, on (310) 742-8625.

Can cracked cooktop glass be replaced on its own?

Sometimes. On some models the glass is a part in its own right; on others it only comes as a glass-and-frame assembly, which changes the price completely. We look the part number up against your model before quoting anything. Ask Wolf Repair Pro Los Angeles on (310) 742-8625 and we will check it.

Do you repair Wolf rangetops with a griddle or a charbroiler?

Yes — the sealed-burner rangetops, and the griddle and charbroiler modules that sit in them. Uneven heat across a griddle plate and a charbroiler that scorches in patches are two of the commonest calls we take. Wolf Repair Pro Los Angeles covers all four neighbourhoods on (310) 742-8625.

What does a cooktop diagnosis cost?

A flat $89, whatever the fault turns out to be, covering the call-out and the diagnosis. That amount is deducted the moment you approve a repair, and the figure for the work is agreed before the maintop comes off. Book Wolf Repair Pro Los Angeles on (310) 742-8625.

Wolf · Los Angeles

Say what it is doing. We will say what it is.

The call-out and the diagnosis are a flat $89, deducted once you approve a repair, and the figure for the work is agreed before it starts. Somebody picks up 24/7; the van runs 8am to 8pm, every day.

Close view of a dark cooktop deck with one burner cap removed, oven door open below with a wire rack pulled half out, adjustable wrench on a towel alongside